Xerox AltaLink C81 Series User Manual page 338

Troubleshooting
4. To remove the staple cartridge, grasp the orange handle, then pull the handle toward you.
5. Check inside the finisher for any loose staples, then remove the staples.
6. To open the staple cartridge clamp, pull the clamp in the direction shown.
7. Remove the jammed staples, then push the clamp in the direction shown until the clamp clicks
into the locked position.
The points of the jammed staples are sharp. Remove the jammed staples
WARNING:
carefully.
338 Xerox AltaLink
®
User Guide
C81XX Series Color Multifunction Printer
®