Installation instructions
3.4.1 Marking of sections
WD-B 550S - WD-B 950S
A
A = Stand cross-bar
B = Leg
C = Pallet
D = Handtruck
The machine is normally divided into two sections. In some cases, the machine
can be delivered in more than two sections. The installation instructions describe
the assembly of a machine that has been split into two sections. Regardless of
the number of sections, the assembly of all sections is undertaken in the same
way. The sections are marked on the outside of the packaging with the following
information:
•
Part 1 – infeed section with washing zones
•
Part 2 – outfeed section with final rinse and drying zone
•
Arrows which indicate the feed direction of the machine
•
Marking of the front with the text FRONT
Part 1
FRONT
Marking of the packaging
B
C
Part 2
FRONT
11
Rev. (202209)
A
Uppackn
D
35-1-00-007