Channels - Strong 9120072370595 User Manual

7.1.6 Factory Reset
The factory reset will set the receiver back to the default settings. All saved channels and settings will be
lost!
To reset the receiver, enter your PIN-Code (DEFAULT PIN-CODE: 0000). Use t u to select OK to perform
the reset or Cancel to return to the menu. After the factory reset the receiver will start within the First
Time Installation.
WARNING:

7.2 Channels

Press MENU and use t u to select the Channels menu. The following sub-menus are available: TV
Channel Manager, Radio Channel Manager, Electronic Programme Guide and Parental Control.
7.2.1 TV Channel Manager
This menu allows you to customize your channel list or create favourite lists. To perform the desired
action, proceed as described below.
On the upper left, you can see the preview of the currently selected channel. Below you can find the
selection of the various functions as well as FAV for creating favourite lists. In the middle is the empty
list where selected channels will be displayed. On the right, in the Program List you will see the channels
listed as in the standard channel list (depending on which one was selected during the First Time
Installation). If the simpliTV list is selected, it will be displayed in the middle and the My TV list on the right.
This function is identical to the other favorites lists, please see below at Create Favourite Lists.
Use pq to select a desired function and then u to go to Program List (except when selecting FAV, see
below). Then you will see that the selected option is dark grey. You can use P+/P- to scroll through lists.
! and VOL+/VOL- are also available in this mode.
If you are in the Program List (right), you can select channels to be locked, deleted or moved by using OK.
These are listed in the centre under Selected. In this stage the receiver will switch to the selected channel
automatically which should make the allocation easier for you. If you have marked a channel by mistake,
move to the centre and press OK on the channel and the selection will be cancelled.
Lock
Delete
Move
A factory reset will permanently delete all your personal settings, channels
and timers. Please consider this before you perform a factory reset.
However, you can make a backup of your data to save your satellite,
transponder and channel lists in advance, please read chapter 7.5.3
Database backup to USB device for more information.
Use this function to lock channels. Locked channels are marked with the 
after saving. Locked channels are locked in all channel lists, the PIN-Code
must be entered for watching them (DEFAULT PIN-CODE: 0000).
Here you can mark the desired number of channels for deletion and only if
you leave the menu by pressing the  button you will be asked if you want
to confirm the changes. This applies to all changes you have made.
Use this function to move one or more channels. To do so, select the
channel/s you want to move with OK in the Program List, they will be
shifted into the Selected column. You can already define the order of their
appearance with the targeted selection. Then use pq and P+/P- buttons
to select a position in the Program List where you want to insert the channels
17