Strong 9120072370595 User Manual page 20

One Transponder:
After choosing the desired settings, press OK to start the channel search, or press  to exit the menu
without scanning.
* Only available if more than one satellite has been setup.
NOTE:
NOTE:
7.1.4 1 Edit, add or delete transponders
In this submenu, you can edit transponders. Use pq to navigate.
Frequency:
Symbol Rate:
Polarization:
Use pq to select Save to accept or Cancel to discard the changes.
If you have selected a specific transponder from the list and want to delete it, use the YELLOW button
and confirm the message with OK.
7.1.5 Channel list selection
In this menu, you can select any of the four available channel lists without the necessity of a Factory Reset.
This menu is structured almost the same as the first time installation, for details please see chapter 4.3
Channel list selection and 4.4 Regional Channels. In this menu, the confirmation of the list is done with
the OK button. The previously selected regional channel is already highlighted, but you can also select
another one.
NOTE:
NOTE:
16
order of the channels can be edited in My TV List therefore see chapter 7.2.1
TV Channel Manager.
Search on the transponder selected in above.
Network Data/NIT Table (Network Identification Table): This function allows
you to search for the NIT data of the corresponding satellite to receive
newly appeared channels. Please consider that unlike Astra 19.2 or HOT
BIRD 13° some satellites do not offer this function or only support it partly.
If you have any questions, please contact your dealer or the service/service
hotline.
If you want to add or edit parameters for a transponder, we recommend
verifying it by consulting websites like: www.lyngsat.com; www.kingsofsat.
net or you can refer to professional journals.
Use the 0~9 buttons to enter the desired/changed frequency.
Use the 0~9 buttons to enter the required symbol rate.
Use the t u buttons to change the polarization.
Previous changed or added channels (of a previous channel list), as well as
favourite lists, will be lost
The simpliTV list contains channels in the sequence and numbering of the
broadcaster. Added/additional channels which are not included in the list,
will be listed from channel number 400 and cannot be edited. The channels
can be edited in My TV List, see chapter 7.2.1 TV Channel Manager