Table of Contents
Advertisement
7.7 Network
The Network menu consists of the following submenus: RSS, Weather and IP Setting.
First, connect the CAT5E (or better) cable to the RJ-45 Ethernet port on your receiver and the other end
to the router.
Before you can use the Internet functions, you should check if the Internet connection was successful.
To do so access the IP Setting menu. Use pq to highlight the desired menu and press OK to enter the
menu. Press to exit.
7.7.1 RSS (Really Simple Syndication)
In this menu you can use RSS feeds (links) to read the latest news and news from various sources. Use
pq to highlight the desired link and press OK. Now select a title or headline which you want to read.
Within the individual messages, use t u to quickly switch between the different messages of an
RSS source. If the content of a message exceeds a page, use P+/P- to scroll the page. Press to leave
the message. You can also delete, add or edit an RSS feed. Press the GREEN Add button to open the
keyboard. Use pq t u and OK to enter. Use P+/P- for special characters within the keyboard. To save
the RSS link you created, select Save and press OK.
7.7.2 Weather
In this menu you can check the weather of your region. Use pq to highlight Weather from the Network
menu. If you are connected to the Internet, the Weather page will display details. Use the YELLOW
button City List to open the selection of the most important Austrian and German cities. The default
setting is Vienna.
Use pq or P+/P- to highlight the city of your choice and press OK to select it. You can also search
manually for a desired place by pressing the GREEN Change City button. Use pq t u and OK to
enter. Use P+/P- for special characters within the keyboard. To save the name, select Save and press OK.
The RED button is used to update the weather data and the BLUE button to change the unit between
Celsius and Fahrenheit.
7.7.3 IP-Setting
In this menu, you can set up or check the Internet connection.
By default DHCP is ON. Normally, this will automatically establish the connection. To test the Internet
connection, select SET with the pq butttons and press OK. If this succeeds, a message appears and
you can use the Internet functions of this receiver. If this does not work, check the cable or router or its
Internet configuration. Alternatively, set DHCP to OFF. Then manually enter IP Address, MASK, GATEWAY
and the DNS values with the 0-9 buttons. After entering these values, select Save and press OK to save.
8.0 TROUBLESHOOTING
There may be various reasons for abnormal operation of the receiver. Please check the receiver
according to the procedures shown below. If the receiver does not work properly after checking it,
please contact your local service line or STRONG dealer. Alternatively, you can send a support e-mail
via our website: www.strong.tv. NEVER open or disassemble your receiver. This may cause a dangerous
situation and will void the warranty.
25
Advertisement
Table of Contents
