Strong 9120072370595 User Manual page 19

USALS selection
Configure the motor position by using the USALS function. Enter your geographic location. The motor
is able to calculate all available satellite positions, preconditioned this function is also supported by the
motor. Use pq to select the Antenna Position sub-menu.
Antenna position:
Go to position
NOTE:
7.1.3 Channel Search
In this menu, you can perform an automatic, network or transponder search. You can also search for
channels on all installed satellites. Use the pq buttons to highlight the desired item and use t u to
change the settings.
Satellite:
Transponder:
Channel type
Scan mode
Search for
One Satellite:
Selected Satellites:
NIT Table:
simpliTV List:
Press OK to open the submenu. Use the 0 ~ 9 buttons to enter the degree of
longitude. Next, select East or West, then 0 ~ 9 to enter the latitude. Finally,
specify North or South. Finally, select Save and press OK to confirm your
entries.
Press OK to move the motor to the desired satellite position. After
computation, you can also select other satellites, go to Satellite and select the
desired one from the list.
For detailed information about correct geographic values of your location,
visit websites such as dishpointer.com, itouchmap.com, or other reliable
sources such as professional journals.
Here you will find a list of satellites, only select a satellite/s which is available in
your installation or have been configured previously.
If this option is marked, the name and position can be changed using the
RED Rename Satellite button. To do this use pq and t u, on the shown
keyboard, to navigate.
Use the t u buttons to switch between the transponders of the selected
satellite. You can also press OK to list them. Use pq or P+/P- to scroll
through the list. Confirm your selection with OK. Press the RED button to Edit
TP, the GREEN to Add TP or YELLOW to Delete Current TP. Details can be found
in chapter 7.1.3.1 Edit, add or delete transponders
Use t u to select the channels you'd like to search for: All, only Free-to-air or
Encrypted channels.
TV & Radio searches for TV and radio channels, TV only for TV channels and
radio only for radio channels.
Use t u to select the search type to be performed. You can choose between
the following options:
Searching on the selected satellite.
Search for all installed satellites. * This option displays a menu for selecting
the installed satellites. After selection, please use the RED Search key to
continue the search.
NIT Scan on the selected satellite.
With this option you can install the simpliTV list at a later stage. In this case,
previously installed or available channels are kept and will be integrated in
the simpliTV list. TV or radio channels which are not included in the simpliTV
list are listed starting with channel number 400 and cannot be edited. The
15