Installing The Batteries; Using The Remote Control - Strong SRT 3032 Manual

Digital hd cable receiver

Table of Contents

2.5 Installing the batteries

Remove the battery cover from the remote control by sliding it downwards and put 2x AAA size batteries

inside the compartment. The diagram inside the battery compartment shows the correct way to install the

batteries.

1. Open the cover

2. Install batteries

3. Close the cover

NOTE: The batteries should not be recharged, disassembled, electrically short-circuited, be mixed or used

with other types of batteries.

USB: 5 V

500 mA max.

Fig. 4

Fig. 5

Table of Contents