Workpiece Boxes - DURKOPP ADLER 745-34-2 Installation Instructions Manual
Sewing unit for runstitching of piped flap and welt pocket openings and pocket corners
Hide thumbs
Also See for 745-34-2:
- Installation instructions manual (160 pages) ,
- Programming instructions manual (97 pages) ,
- Operating instructions manual (94 pages)
Table of Contents
Advertisement
4.3
Workpiece boxes
10
4
–
Fasten the workpiece boxes onto rod 2.
For this purpose push the clamping pieces 4 and 3 on rod 2, align
the height and clamp them firmly by tightening the screws.
–
Loosen the screw at clamping lever 1 and align the workpiece
boxes to the sewing station.
–
Tighten the screw at clamping lever 1.
3
2
1
Advertisement
Table of Contents
