Adjusting The Idle Speed - GAS GAS MC 250F 2021 Owner's Manual

16 TUNING THE ENGINE
16.4
104

Adjusting the idle speed

Warning
Danger of accidents The engine may go out spontaneously if the idle speed is set too low.
–
Set the idle speed to the specified value. (Your authorized GASGAS Motorcycles workshop will be glad to help.)
–
Remove guide plate
–
Position the required guide plate on the grip tube.
Guideline
The label OUTSIDE must be visible. Marking
tioned at marking
Black guide plate (79002014100)
Alternative 1
Grey guide plate (79002014000)
Info
The gray guide plate opens the throttle valve more slowly.
The black guide plate opens the throttle valve more quickly.
The black guide plate is already mounted when the vehicle is
delivered.
102246-10
–
Clean the outside of the handlebar and the inside of the grip tube.
Mount the grip tube on the handlebar.
–
Attach the throttle cables to the guide plate and route correctly.
–
Position half-shells
Guideline
Screw, throttle grip
–
Slide on sleeve
ment.
A00850-10
Finishing work
–
Check the play in the throttle cable. (
4 5
from handle tube .
A
B
.
3
, mount and tighten screws
M6 5 Nm (3.7 lbf ft)
1
and check the throttle grip for ease of move-
p. 102)
must be posi-
2
.