Lubrication And Oil Level Check; Lubrication Points; Oil Level Check - Zepro ZT MK2 Installation Instructions Manual

Lubrication and oil level check

9 Lubrication and oil level check
9.1

Lubrication points

The following lubrication points must be greased on installation. When lubricating the slider's wheels, the
slider must be furthermost in on the rails to access the grease nipples through the slide profile's holes.
!
IMPORTANT
Use LE lubricant 4622 for the lubrication points below.
1. Lift arm and tilt cylinder platform bearings, right and left side.
2. Lift arm, lift cylinder and tilt cylinder frame bearings, right and left side.
3. Slider wheels, right and left side.
1
9.2

Oil level check

Check the oil level in the tank, top up if necessary.
If the hydraulic oil needs to be replenished, only the oil recommended by ZEPRO is permitted to be used.
Hydraulic systems with hydraulic oil tanks without labelling are only permitted to be filled with highly refined
mineral oil (art. no. 21963, 1 litre).
Hydraulic systems with hydraulic oil tanks marked with a specification for the hydraulic oil are only permitted
to be filled with the oil specified on the label.
www.zepro.com
2
Picture 57. Lubrication points
ZT MK2
3
41