Welding Applications - ESAB Versotrac Cadet EWT 1000 Instruction Manual

5 OPERATION
Mount the work piece voltage reference brush on any of the guide bars.
Connect the cable into the work piece voltage reference input on the control unit.
NOTE!
Control cable 0446 146 880-885 is required between the control unit and the power source.
See chapter "ACCESSORIES".
5.11

Welding applications

NOTE!
The following pictures can differ from the Cadet version of the tractor. The pictures are
however correct when it comes to handling the equipment.
0463 893 001 - 28 - © ESAB AB 2023