Table of Contents
Advertisement
GB
3
INTRODUCTION
3.1
General
The A2 SGF1 welding head is designed for MIG/MAG welding of butt and fillet joints.
A2 SGF1 is intended for use together with control box A2--A6 Process Controller and
ESAB's LAF welding power source.
The welding head can be horisontally or vertically positioned by way of linear slides.
The angular motion can be freely adjusted by way of an angle slide.
Push angle for forehand welding or drag angle for backhand welding can be set
using the rotary attachment.
3.2
Technical data
Type of gas:
Permissible load at 100 %:
Wire dimensions:
Non--alloy / Low--alloy
Stainless steel
Cored wire
Aluminium
Wire feed speed
Setting range, contact device
Brake hub braking torque
Max. weight of wire
Weight (without wire):
with hand operated linear slides
with motor driven linear slides
Max. lateral inclination (whole unit)
Setting length of the slide*
hand operated
motor driven
*) NB. Available in other lengths on request.
3.3
Welding method
MIG/MAG welding
In MIG/MAG welding the welding bead is shielded by way of shielding gas.
The welding head is water--cooled. The cooling water is connected to the respective
connection by way of hoses.
fha8d1ea
Mix/Ar
600 A DC
1.0--1.6 mm
1.0--1.6 mm
1.0--2.4 mm
1.0 -- 2.0 mm
2.0--25 m/min
±45˚
1.5 Nm
30 kg
15 kg
43 kg
25˚
90 mm
180 mm
- - 66 - -
A2 SGF1
CO
2
650 A DC
1.0--1.6 mm
1.0--2.4 mm
2.0--25 m/min
± 45˚
1.5 Nm
30 kg
15 kg
43 kg
25˚
90 mm
180 mm
Advertisement
Table of Contents
