Connecting To Power Source - ESAB Versotrac Cadet EWT 1000 Instruction Manual

4 INSTALLATION
4.3.1

Connecting to power source

Connect the interconnection cable to connector.
Interconnection cable between CAN based ESAB power source and Verotrac Cadet Control unit are
available as accessories in different lengths.
ESAB CAN based power sources are LAF xxx1, TAF xxx1 and Aristo® 1000.
For further information about connecting welding power source, see separate instruction manual.
Always use the dust cover on the connection where no cable is connected.
0463 893 001 - 15 - © ESAB AB 2023