Measured Screen; Set Screen, Power Source - ESAB Versotrac Cadet EWT 1000 Instruction Manual

5 OPERATION
5.7.4

Measured screen

SET
The MEASURED screen shows the measured values during welding. The information on the screen
depends on the selected welding method.
The screen shows information divided into four parts:
A short press on
screen. A long press on
Turn any of the knobs after welding stop to open the
and the SET
A short press on any of the keys 1, 2, or 3 recalls the corresponding memory slot. The
screen is opened and the values are displayed.
5.7.5

Set screen, power source

SET
0463 893 001
MEASURED
Method, wire, heat input Amperage
Travel speed Voltage
OK when an AC power source is connected will open the AC settings
OK opens the
screen is kept open.
MEASURED
WELDING MENU settings screen.
SET screen. The values are shown
- 24 -
SET
© ESAB AB 2023