Table of Contents
Advertisement
2-5. Performing sewing shape selection
A
C
D
E
Be sure to use the media that has been formatted with IP-420.
For the formatting procedure of the media,
refer to
"II-2-28. Performing formatting of the media" p.90 .
Select the sewing shape you desire from SEWING SHAPE SELECTION buttons E and press ENTER
F button.
The sewing shape list screen corresponding to the kind of sewing shape you selected is displayed.
① Display the data input screen.
Only in case of the data input screen (blue), the selection of
sewing shape can be performed. In case of the sewing screen
(green), press READY key
screen (blue).
② Call the sewing shape selection screen.
Press SEWING SHAPE button A and the sewing shape
selection screen is displayed.
③ Select the sewing shape.
There are 4 kinds of the sewing shape.
Press SEWING SHAPE SELECTION button
* This button is not displayed in the initial state.
B
When button C or D
X or Y enlarging/reducing ratio can be changed. For the
details, refer to
④ Determine the kind of sewing shape.
There are 4 kinds below of the sewing shape. Select the kind
you desire from among them.
Pictograph
Users' pattern
Vector format data
M3 data
F
Sewing standard format
– 39 –
and display the data input
is pressed in this screen,
"II-2-6. Changing item data" p.41
Maximum number of
Name
B.
.
patterns
999
999
999
999
Advertisement
Table of Contents
