JUKI AMS-220EN / IP-420 Instruction Manual page 96

[ When setting 2-step stroke position of pattern button ]
B
In case of the pattern button, 2-step stroke position can be set to
each pattern button data.
① Display the data input screen at the time of pattern button
selection.
Only in case of data input screen (blue) at the time of pattern
A
selection, the contents of pattern can be changed. Incase of
sewing screen (green), press READY key
data input screen at the time of pattern button selection.
② Display the pattern data change screen.
Press PATTERN BUTTON DATA CHANGE button
and the pattern button data change screen is displayed.
③ Display 2-step stroke position setting screen.
Press 2-STEP STROKE POSITION CHANGE button
B and the 2-step stroke position setting screen is displayed.
Input possible range of 2-step stroke position depends on the
presser types.
– 92 –
to display the
A