Count-Up Releasing Procedure; How To Change The Counter Value During Sewing - JUKI AMS-220EN / IP-420 Instruction Manual

(2) Count-up releasing procedure

(3) How to change the counter value during sewing

A
B
Here, input the existing value.
When the count-up condition is reached during sewing work, the
count-up screen is displayed and the buzzer beeps. Press CLEAR
A to reset the counter and the screen returns to the
button
A
sewing screen. Then the counter starts counting again.
① Display the counter value change screen.
When you desire to revise the counter value during sewing
work due to the mistake or the like, press COUNTER VALUE
CHANGE button
value change screen is displayed.
② Change the counter value.
Input the value you desire with ten keys, or "+" or "–" key B.
③ Determine the counter value.
D
When ENTER button
mined.
When you desire to clear the counter value, press CLEAR but-
D.
ton
C
– 52 –
A on the sewing screen. The counter
C is pressed, the data is deter-