When The Error Is Displayed After End Of Sewing; When The Rest Switch Is Not Displayed - JUKI AMS-220EN / IP-420 Instruction Manual

(2) When the error is displayed after end of sewing

(3) When the rest switch is not displayed

When a large slip is detected, the reset switch is not displayed.
① Release the error.
When RESET button
leased, the sewing screen is displayed.
② Perform sewing work again from the start.
When the pedal is depressed, sewing starts.
A
① Turn OFF the power.
– 96 –
A is pressed, and the error is re-