Accept An Invitation - ASCOM d63 User Manual

User Manual
Ascom d63 DECT Handset
8.2.5

Accept an Invitation

Accept Invitation Received as Incoming Call (PTT Basic)
A PTT invitation received as an incoming call is indicated by the
window, a message containing maximum 24 characters can also be shown. See
Figure 9. Incoming Invitation Received as a Call
1 Press "Accept", or
Default the handset starts in inverted mute and loudspeaking mode, but it can be
configured differently in a PTT group.
2 Press and hold
muted again when
3 The Multifunction button may have also been configured to act as the
NOTE: The support for Multifunction button is dependent on what model of handset
that is used. For more information, see
Invitation Received as Incoming Call during an Ongoing Call
If a user receives an invitation during an ongoing call, it is displayed as an ordinary
invitation, see
pressing "Accept" or "Decline", respectively.
Note: The invitation cannot be accepted or declined by pressing
If the user presses "Accept", the ongoing call is disconnected and the PTT call is connected.
Alternatively, the ongoing call can also be disconnected and the PTT call connected if the
following is fulfiled:
• The handset is configured to answer invitations automatically
• The user does not respond to the invitation within 10 seconds
• The invitation has higher priority than the ongoing call
If the user declines the invitation, the he/she can re-join the PTT later on, see
Group on page 57.
Accept Invitation Received as Message (PTT Advanced)
A PTT invitation received as a message is viewed the same way as an ordinary message. The
message can contain up to 1000 characters. See
28 June 2016 / Ver. PA5
.
to open the microphone for transmitting. The microphone is
is released.
figure 9 on page 55. The user can either accept or decline the invitation by
icon. In the dialogue
1.2 Functions and Accessories
or
figure 10 on page 56.
TD 93119EN
figure 9.
button.
on page 2.
, respectively.
8.2.8 Re-join a
55