System - ASCOM d63 User Manual

User Manual
Ascom d63 DECT Handset
8.1.3

System

The handset can subscribe up to eight different systems.
Change System
Select "Automatic" or a specific system. If the handset is set to "Automatic" it selects a
system according to the priority list, see
Subscribe Handset in IP-DECT System using Easy Registration
A handset can subscribe to an IP-DECT system automatically if the following are fulfilled:
• The IP-DECT system is configured for Easy Registration, see the corresponding
Installation and Operation manual for the IP-DECT system.
• The handset's IPEI is registered in the IP-DECT system, see the corresponding Installation
and Operation manual for the IP-DECT system.
• The handset is not subscribed to any systems.
1 If needed, switch off the handset by pressing
2 Switch on the handset by pressing
3 Select language to be used or press "Cancel". If Cancel is pressed, the default
language English is used.
4 The handset starts to search for IP-DECT systems. When a system is found the
handset subscribes to it.
NOTE: If no system is found within 2 minutes or "Cancel" is pressed, the handset returns to
the System menu. If this is the case, continue with
Manually.
Subscribe Handset in DECT System Manually
To subscribe an DECT system manually, the "Park:" (Portable Access Right Key) and "Ac:"
(Authentication code) related to the system are needed. Contact the system administrator
for more information. If the handset has been subscribed in one system, additional systems
have to be subscribed manually.
NOTE: The PARK code may not be needed if there is no alien DECT system within the
coverage area.
The IPDI code is a unique code which has been assigned to the handset, see also
Menu on page 77.
1 Select "System".
2 Select "Subscribe".
3 Press "Next".
4 Enter System name (optional). If no system name is entered, the default name is
used. That is System A, System B etc. depending on which system name that is free.
5 Press "Next".
6 Enter PARK code (max. 31 digits). The PARK code may not be needed if there is no
alien DECT system within the coverage area.
7 Enter AC code. The AC code length must be between 4 - 8 digits.
28 June 2016 / Ver. PA5
Priority on page 51.
.
.
Subscribe Handset in DECT System
TD 93119EN
11.1 Admin
50