Contacts - ASCOM d63 User Manual

User Manual
Ascom d63 DECT Handset
Activate Profile
1 Enter the menu by pressing the "Menu" Soft key, or the confirmation button on the
Navigation key.
2 Select
3 Select profile from list.
When a profile is activated, the icon
mode.
Delete Profile
1 Enter the menu by pressing the "Menu" Soft key, or the confirmation button on the
Navigation key.
2 Select
3 Select profile from list.
4 Press "More".
5 Select "Delete" from menu.
6 Press "Select".
7 Press "Yes" to confirm.
Edit Profile
1 Enter the menu by pressing the "Menu" Soft key, or the confirmation button on the
Navigation key.
2 Select
3 Select the profile to edited.
4 Press "More" and then select "Edit".
5 Following options can be performed:
• Edit the wanted setting by marking it and then press "Edit".
• Add additional settings by pressing "More" and then select "Add setting" or
"Import from".
• Remove a setting by marking it and then select More > Remove setting.
6 If needed, mark the added settings and press "Edit" to make the changes.
8.7

Contacts

The handset has a phonebook with 250 entries where the user can add, delete, and edit
names and numbers. The phonebook lists all names in alphabetical order, where three
numbers can be added for each contact; work number, mobile number, and other number.
In addition, a company phonebook with up to 1000 entries can be downloaded to the
handset via the WinPDM/Device Manager. The company phonebook name and numbers can
not be edited or deleted by the user. The phonebook lists all names in alphabetical order.
The local and company phonebook appears in the same list but the company names are
indicated by an icon
5.3.9 Dial a Number from the Company Phonebook
A central phonebook can also be accessed, see
Phonebook
TIP: When searching for a contact, the input language can be temporarily changed by long
pressing
28 June 2016 / Ver. PA5
in the menu.
in the menu.
in the menu.
in front of the name. The contact only includes work numbers. See
on page 27. This feature is a system dependent feature.
. This can be used to temporarily access characters in a foreign language.
and the name of the profile are displayed in idle
on page 27 for more information.
5.3.8 Dial a Name from the Central
TD 93119EN
65