Soft Keys; Hot Keys; Multifunction Button; Volume Button - ASCOM d63 User Manual

User Manual
Ascom d63 DECT Handset
2.4.7

Soft Keys

soft keys
Figure 4. Soft Keys.
The three Soft keys are located just beneath the display and the functions of each Soft key
is indicated by text in the display just above the keys.
In idle mode, the Soft keys can be used for specific functions defined by the user of the
handset.
2.4.8

Hot Keys

Any key "2" - "9" can be set to a Hot Key. A long press on any of these numbers in stand by
mode are by default a shortcut to the Call contact list. The list is in alphabetic order, and
depending on which key that is pressed is dependent on where in the list the contact
appears.
A Hot Key can be programmed to give access to frequently used functions such as dialling a
specific handset number, a shortcut on the menu, or sending an SMS.
2.4.9

Multifunction Button

NOTE: The support for this feature is dependent on what model of handset that is used. For
more information, see
This button can be used as a shortcut to functions; long or double press modes. It is by
default not used, but can be defined by the user of the handset. If the button is defined, it
can be used in standby mode only.

2.4.10 Volume Button

The two buttons placed on the upper left side of the handset are used for increasing/
decreasing the earpiece, headset, and the loudspeaker volume.
28 June 2016 / Ver. PA5
1.2 Functions and Accessories on page 2.
TD 93119EN
12