ASCOM d63 User Manual page 90

User Manual
Ascom d63 DECT Handset
SERVICE NEEDED
Invalid IPDI
Note: This display
message is only shown
in English.
Enter PIN code
Battery low, charge now The battery level is low.
Phonebook is not
available at the
moment.
Voicemail number not
defined
Could not encrypt
connection
Not allowed
28 June 2016 / Ver. PA5
Easy replacement procedure not
followed correctly or failure during
easy replacement procedure.
The handset's lock is activated.
The phonebook does not respond,
not available at the moment.
There is no Voicemail number
defined in the handset.
The parameter "Encryption
Required" is enabled in the
handset in combination with;
1) Unencrypted base station(s);
and/or,
2) Unsupported base station(s).
1) The user cannot login to the
handset with the shared phone
functionality enabled, due to
another handset currently using
the same extension (User).
2) The user cannot logout from
the handset with the shared
phone functionality enabled, due
to incorrect password (AC code).
3) The extension (User) does not
exists.
4) The password is not correct.
TD 93119EN
Send the handset for service.
Enter the required PIN code. If
PIN code lost enter new via
WinPDM or do a factory reset
via WinPDM.
Charge or replace the battery.
Try again later or if fault
persists do a factory reset via
admin menu or WinPDM.
Define a Voicemail number via
WinPDM.
1) Disable the "Encryption
Required" parameter in
handset; and/or,
2) Enable the encryption in the
base station(s); and/or,
3) Use supported base
station(s). Ask your supplier.
1) Logout from the handset
that uses the same extension.
2) Enter #11*<AC code># on
the keypad and press the off-
hook key to logout from the
shared phone.
3) Make sure that you entered
correct extension. If needed,
contact the system
administrator.
4) Make sure that you have
entered correct password. Ask
the system administrator if you
have forgot the password.
82