Studio Set; Top Screen - Roland Integra-7 Parameter Manual

Studio Set

Top Screen

Part number,
Tone number/name
Tone type/bank
Solo and mute on/off for
each part
*
There are two types of top screen: TYPE 1 and TYPE 2 . Use
Parameter
Studio Set Number
Tone Type
Tone Bank
Tone Number
MUTE
SOLO
4
TYPE1
Studio set number/name
Part number,
Tone type/bank/name
Solo and mute on/off for
each part
[SHIFT]
Value
1–64
"TONE tab"
For details, refer to (p . 6) of the PART VIEW screen .
OFF, ON
OFF, 1–16
TYPE2
[ENTER]
to switch between them .
+
Explanation
Selects the number of the studio set .
The studio set will be switched when you change the number and press [ENTER] .
"Top Screen"
(This is shown if the system setting
Mutes (ON) or un-mutes (OFF) each part .
Use this setting when, for example, you want to use the instrument for karaoke by muting the part
playing the melody, or when you want to play something using a separate sound module .
* The bar (—) above the part number is erased for parts whose mute setting is on .
* The Mute Switch parameter does not turn the part off, but sets the volume to minimum so that
no sound is heard . Therefore, MIDI messages are still received .
Only the sound of the part set to Solo will be heard .
* You can't set the Ext part to Solo .
is TYPE 2 .)