Operating manual Robot powder spray gun PER-X1
6 Assembly and Commissioning
6.6.4 PER-X1 Twin Inside (TI)
WARNING
Improper settings!
The following requirements must be ensured for the operation of the PER-X1 Twin spray
gun:
4 Both spray guns must always be operated with the same settings for high voltage,
current limitation and characteristic curve quality.
4 Both spray guns must always be switched on and off at the same time.
4 In case of the malfunctioning of one spray gun, the second spray gun must be
switched off immediately.
P_04925
28
A
Order number 2444998 | Edition 10/2022
A
X