Operating manual Robot powder spray gun PER-X1
8 Cleaning and Maintenance
1. Install electrode holder 3 together with nozzle 2 in nozzle insert 4 and tighten union
nut 1.
2. Place the double adapter 5 on the gun body and tighten it.
8.8.3 Cleaning the Double Adapter
3
2
1
A
P_05465
1. Loosen the double adapter 5 and separate it from the gun body.
2. Unscrew union nut 1 and carefully pull out electrode holder 3 together with the nozzle
2.
3. Carefully blow out the areas marked with A with a compressed air gun and remove any
powder residues.
4. Assembly in reverse order.
8.8.4 Replacing the Wearing Parts
3
P_05466
2
1
1. Unscrew union nut 1.
44
4
A
5
5
4
A
6
Order number 2444998 | Edition 10/2022