WAGNER PER-X1 Translation Of The Original Operating Manual page 24

Operating manual Robot powder spray gun PER-X1
6 Assembly and Commissioning
1
3
I
O
4
5
7
Work steps:
1. Switch off the high-voltage generation on the control unit.
2. Before connecting the robot spray gun, check that all components, such as the nozzle
system and union nut, are correctly fitted.
3. Connect electrical cable of the robot spray gun to the control unit.
4. Connect the powder feed hose to the robot spray gun and the powder supply.
5. Connect the atomizing air hose to the robot spray gun and to the control unit.
24
2
6
8
Order number 2444998 | Edition 10/2022