Operating manual Robot powder spray gun PER-X1
8 Cleaning and Maintenance
2. Pull out electrode holder 3 and nozzle 2.
3. Gently turn cylindrical union nut 5 (bayonet fitting) and pull it off.
4. Unscrew contact ring 6.
5. Pull off O-ring 4.
6. Clean all components thoroughly and remove any powder residues.
7. Replace the wearing parts with new components.
8. Assembly in reverse order.
For spare and wear parts, see chapter X1 double adapter [8 62].
8.9 ASSEMBLY OF THE CORONASTAR
The CoronaStar is a retrofit set for the robot spray gun, which helps to achieve an even
better surface quality (e.g., reduction of "orange peel").
2
±90°
P_04907
1. Guide plug-in contact 1 of the CoronaStar into the drilled hole B on the shoulder.
2. Attach clip 2 of the CoronaStar onto the housing.
Flexible positioning in a range of ± 90° is possible.
Order number 2444998 | Edition 10/2022
1
B
45