JUMO miroTRON Operating Manual page 53

Parameter
Cycle time Cy1
Switching differential
Xd1
Working point Y0
Maximum
Output value limit Y1
Minimum
Output value limit Y2
Minimum relay
switch-on duration
Tk1
Value range Default set-
ting
0 to 9999 20
0 to 999 1
-100 to +100 0
0 to 100 100
0 to 100 0
0 to 9999 0
7 Configuration
Unit Meaning
s The cycle time should be chosen
such that the energy supply to
the process is as continuous as
possible without overloading the
switching elements.
Physical unit of Hysteresis for proportional band
the controller Pb = 0
size
% Working point correction for a P
or PD controller (correction value
for the output level).
If the actual value has reached
the setpoint value, the output lev-
el corresponds to the working
point Y0.
% Maximum output value limit
(only effective if Pb > 0)
% Minimum output value limit
(only effective if Pb > 0)
s Limitation of the switching fre-
quency
53