Table of Contents
Advertisement
7.2.1
Online parameters
An active connection between the setup program and the device is required for executing these func-
tions.
Fine adjustment
You can use this function to correct the measured values of the analog input. In contrast to measured
value offsetting, which is used to specify a constant correction value for the entire characteristic line, fine
adjustment can also be used to change the gradient of the characteristic line.
This function is identical to the fine adjustment in the device (see configuration of the analog input).
Approval of extra codes
You can use this function to activate additional functions (extra codes) for the device via the setup pro-
gram.
Action
Generate code number
Enter activation code
Reset extra codes
Calibrate/test
The following functions are available in this menu:
•
Hardware/software: This window displays the hardware and software status of the device.
•
Calibration constants: This window displays the calibration constants of the analog input.
•
Analog input: This function tests the analog input. For this, the signal or sensor must be connected
to the analog input.
•
Digital input: This function displays the logical status at the digital input. Any inversion activated in
the configuration is not considered.
•
Digital outputs: This function is used to set the logical statuses at the digital outputs. Any inversion
activated in the configuration of the respective digital output is not considered.
•
Display: This function is used to activate or deactivate all display elements of the device.
•
Keypad: This function checks all the keys on the device. After pressing "Read keys", each press of
a key on the device is shown by a red circle around the corresponding key in the setup program.
Version
To generate a code number, click the
function to select it and then click the
"Next" button. Follow the other in-
structions.
To enter an activation code, click the
function to select it and then click the
"Next" button. Follow the other in-
structions.
To reset extra codes, click the func-
tion to select it and then click the
"Next" button. Follow the other in-
structions.
7 Configuration
Description
This function is used to generate a
code number to activate an extra
code. The code number is required to
obtain an activation code from a sales
partner.
This function is used to activate an
extra code. This requires the activa-
tion code received from the sales
partner.
This function can be used to lock an
extra code that has been activated.
Locked extra codes can only be acti-
vated by re-enabling. This procedure
is subject to charge.
41
Advertisement
Table of Contents
Troubleshooting
