Digital Input; Digital Outputs - JUMO miroTRON Operating Manual

9 Technical data
Measuring Measuring
probe range underflow
RTD temperature ++
probe
Thermocouple ++
Current ---
0 to 20 mA
Current ++
4 to 20 mA
Voltage 0 to 10 V ---
++ = is detected
a
Dependent on the set characteristic line
9.2

Digital input

Input for potential-free contact
Function
9.3

Digital outputs

1 relay (changeover contact)
Switching capacity
Contact life
1 relay (normally open contact)
Switching capacity
Contact life
1 relay (normally open contact)
Switching capacity
Contact life
1 digital output DC 0/14 V
Output signal
Current
4 relays (normally open con-
tact)
Switching capacity
Contact life
68
Measuring
range overflow
++
++
++
++
++
--- = is not detected
Contact closed: input is active (R
Contact open: input is inactive (R
Max. 10 A at DC 30 V or AC 250 V, resistive load
100,000 switching operations at rated load
Max. 5 A at DC 30 V or AC 250 V, resistive load
100,000 switching operations at rated load
Max. 10 A at DC 30 V or AC 250 V, resistive load
100,000 switching operations at rated load
DC 0/14 V ±15 %
Max. 20 mA (at nominal voltage 14 V)
Max. 2.5 A at DC 30 V or AC 250 V, resistive load
200,000 switching operations at rated load
Short-circuit Break (probe/
(probe/line) line)
++ ++
--- ++
--- ---
++ ++
--- ---
(+) = is detected in certain conditions
< 1 kΩ)
ON
> 100 kΩ)
OFF
Reverse polarity
---
a
(+)
---
++
++
Order code
23
Order code
26
Order code
24