Analog Selector; Setup Program - JUMO miroTRON Operating Manual

7 Configuration
7.1.2

Analog selector

The following list of analog functions are available to select from in the configuration (analog selector).
Function
No selection
Analog input
Setpoint value 1
Setpoint value 2
Current setpoint value
Controller output
Output level display
Terminal temperature
Timer runtime
Timer remaining running time
Timer value
Service counter
Operating time
7.2

Setup program

The setup program helps users to easily configure the devices. It comes with the following language op-
tions: German, English, French, and Spanish.
The setup program can be used to create the configuration data of the devices, save them in a file, and
transfer them to the device. It is also possible to extract the configuration data of the device. Data is
transferred serially using the USB interface (setup interface). The data can be printed off for use as sys-
tem documentation.
A 30-day test version of the setup program is available for download. The license number for the full ver-
sion is available for a fee and can be requested from your sales partner.
40
Note
Only with extra code "PID two-state controller"
Only with thermocouple measurement input
Not configurable for display 1