Automatic Mowing; Mowing Independently Of Active Times - Stihl RMI 522.0 C Instruction Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 99
If the mow plan type Dynamic is
selected, not all the active times
may be necessary for optimal lawn
care under certain circumstances
(e.g. warm weather or generous
time window).
Changing the active times: (
– Additional active times for further
mowing operations.
– Adapting the time window, e.g. to
prevent mowing during the morning or
night.
– Omitting individual active times
because the mowing area is e.g. being
used for a party.
Extending the mowing duration: (
– There are areas which are not mown
sufficiently, e.g. because the mowing
area has many corners.
– Intensive grass growth during the
growing period.
– Particularly dense lawn.
Reducing the mowing duration: (
– Reduced grass growth due to heat, cold
or dryness.
Creation of a new mowing plan: (
– The size of the mowing area has been
changed.
New installation: (
11.13)
– New location of the docking station.
– Initial operation on a new mowing area
158

15.4 Automatic mowing

● Switching on automatic
mowing:
When automatic mowing is
switched on, the Automatic
11.7)
symbol appears next to the battery
symbol in the display. (
● Starting mowing operation:
With the mow plan type Standard, the
robotic mower sets off at the beginning
of each active time and mows the lawn.
With the mow plan type Dynamic, the
mowing operations are automatically
distributed between the available active
times. (
11.7)
● Ending mowing operation:
When the battery is discharged, the
robotic mower automatically travels
back to the docking station. (
A running mowing operation can be
ended manually at any time using the
STOP button or the "Drive home"
menu. (
Activating Homecall on the docking
11.7)
station also ends the running mowing
operation immediately. (
The mowing operation can also be
ended using the app – send the robotic
11.7)
mower to the docking station. (
Mowing areas that the robotic
mower reaches via a corridor are
only mown if starting points have
been defined in the relevant area.
15.5 Mowing independently of active
times
● Activate the docked robotic mower by
pressing a button. This also switches on
the docking station.
11.7)
14.3)
15.6)
5.1)
13.1)
10.)
Mowing areas with docking station:
● Immediate mowing:
Call up the Start mowing command
(
11.5).
The mowing operation starts
immediately and continues until the
selected time. A starting point can be
selected, if available.
● Start mowing using the app. (
The mowing operation starts at the
selected start time and continues until
the selected end time. A starting point
can be selected, if available.
● Ending mowing manually:
A running mowing operation can be
ended at any time using the STOP
button or the "Drive home" menu
(
11.6). (
5.1)
Activating Homecall on the docking
station also ends the running mowing
operation immediately. (
The mowing operation can also be
ended using the app – send the robotic
mower to the docking station. (
If necessary, the robotic mower
charges the battery in the interim
and then continues the mowing
operation until the selected end
time.
Secondary areas:
● Activate the robotic mower upright in
the docking station. This also activates
the docking station.
● Carry the robotic mower to the
secondary area.
● Activate the secondary area. (
0478 131 9965 A - EN
10.)
13.1)
10.)
12.10)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rmi 522 c

Table of Contents