Programming; During Operation - Stihl RMI 522.0 C Instruction Manual

– that the entire machine (housing, hood,
flap, fastening elements, mowing blade,
blade shaft, etc.) is neither worn nor
damaged.
– that the mowing blade and the blade
fastening are in proper condition
(secure seating, damage, wear).
( 16.3)
– that all screws, bolts, nuts and other
fastening elements are in place and
properly tightened. Tighten any loose
screws, bolts and nuts prior to initial
operation (observe tightening torques).
Carry out any necessary work or consult a
specialist dealer. STIHL recommends
STIHL specialist dealers.

6.7 Programming

Observe local regulations regarding
permitted operating times for gardening
power tools with motors and programme
the active times accordingly. (
In particular, programming must also be
adapted so that no children, spectators or
animals are in the area to be mown during
operation.
Changing the programming using the
iMOW® app can result in activities that will
not be expected by other people. Changes
to the mowing plan must therefore be
communicated in advance to all affected
people.
The robotic mower must not operate at the
same time as a sprinkler system. Adapt
the programming accordingly.
Ensure that the correct date and the
correct time are set on the robotic mower.
Correct the settings if necessary. Incorrect
values may cause the robotic mower to
start up unintentionally.
0478 131 9965 A - EN

6.8 During operation

Keep others, particularly
children
and animals, out of the
danger area.
Never allow children to approach or play
with the robotic mower.
Starting a mowing operation using the
iMOW® app may not be expected by third
parties. Affected people must therefore be
notified in advance about possible activity
of the robotic mower.
Never allow the robotic mower to operate
if you know that animals or people,
particularly children, are in the vicinity.
When operating the robotic mower in
public places, signs with the following
notice must be affixed around the mowing
area:
"Warning! Automatic lawn mower! Keep
away from the machine! Children must be
14.3)
supervised!"
Caution – risk of injury!
Never put hands or feet on or
underneath rotating parts.
Never touch the rotating
blade.
Before thunderstorms, or if there is a
danger of lightning strikes, disconnect the
power supply unit from the mains. The
robotic mower must not be operated.
The robotic mower must never be tilted or
lifted when the motor is running.
Never attempt to change settings on the
machine when one of the motors is
running.
For safety reasons, the machine must not
be used on slopes with an incline of more
than 21,8° (40 %).
Risk of injury! A slope inclination of 21,8°
corresponds to a vertical height increase
of 40 cm for a 100 cm horizontal distance.
Beware of the cutting tool
running on for several seconds
before coming to a standstill.
Press the STOP button (
during running operation
– before opening the flap.
Activate the disabling device (
– before lifting or carrying the machine,
– before transporting the machine,
– before removing blockages,
– before carrying out any work on the
mowing blade,
– before checking or cleaning the
machine,
– after hitting a foreign object or if the
robotic mower begins to vibrate
excessively. In these cases, check the
machine, in particular the cutting unit
(blade, blade shaft, blade fastening) for
damage and carry out the necessary
repairs before restarting and working
with the machine.
5.1)
5.2)
109