Service; Information - Stihl RMI 522.0 C Instruction Manual

7. Keylock:
When the keylock is switched on,
the buttons on the display can
only be operated if the Back
button is pressed and held and the
control pad is then pressed forwards.
The keylock is activated 2 minutes after
the last button has been pressed.
8. Link iMOW® and dock:
Following initial operation, the
robotic mower can only be operated
in conjunction with the docking station
installed.
Following a replacement of the docking
station or of electronic components in the
robotic mower or for operation of the
robotic mower on an additional mowing
area using a different docking station, the
robotic mower and docking station must be
linked.
● Install the docking station and connect
the perimeter wire. ( 9.8), (
L
i
f
t
t
h
e
r
o
b
o
t
ic mower slightly by the carrying handle (1)
to relieve the weight on the drive wheels.
Push the machine, resting on its front
wheels, into the docking station.
144
● After pressing the OK button,
enter the PIN code. The robotic
mower will then search for the
wire signal and save it automatically.
This process takes several minutes.
( 9.11)
No PIN code is required in the
safety level "None".

11.17 Service

1. Blade change:
Installation of a new mowing blade is
confirmed with OK. The counter is reset.
2. Find wire break:
If the red LED on the docking station
flashes rapidly, there is a break in the
perimeter wire. (
● Finding a wire break (
3. Hibernation:
9.10)
OK places the robotic mower in
hibernation. The settings are kept, the time
and date are reset.
● Charge the battery fully before
hibernation.
● When resuming operation, wake up the
machine by pressing any button.
4. Reset settings:
The robotic mower is reset to the factory
defaults with OK, the installation assistant
is restarted. (
● Enter the PIN code after pressing
the OK button.
No PIN code is required in the
safety level "None".
13.1)
16.7)
9.6)

11.18 Information

1. Messages:
List of all active errors, faults and
recommendations; shown together
with the times of occurrence.
During trouble-free operation, the text "No
messages" appears.
The message details are displayed by
pressing the OK button. (
2. Events:
List of the last activities of the robotic
mower.
Details of the events (additional text, time
and code) can be displayed by pressing
the OK button.
If certain activities occur too
frequently, detailed information is
available from your specialist
dealer. Errors during normal
operation are documented in the
messages.
3. iMOW® status:
Information on the robotic
mower
– Charge state:
Battery charge in percent
– Rem. time:
The remaining mowing duration during
the current week in hours and minutes
0478 131 9965 A - EN
24.)