Table of Contents
Advertisement
Recording
7
Recording
7.1
Initiate recording / save picture
Activating/deactivating GLOW800 mode (using assigned buttons on
handle and/or foot switch) automatically starts/stops the recording.
After 3 minutes the mode and recording will be stopped
automatically and return to white light mode. Additionally you can
take GLOW800 pictures via an assigned handle and/or foot switch
button or the camera (2) icon on the touch panel.
Refer to the user manual of ARveo 8 for detailed instructions
on how to use the built-in recording system.
7.2
Playback
7.2.1
Via the handles
Play back the last recorded GLOW800 loop by pressing the
X
assigned "Play Loop" button on the microscope handle.
The playback is shown on the monitor only, indicated by a
yellow frame around the video display.
Stop the playback by pressing the "Play Loop" button again.
X
Toggle through previous GLOW800 loops within the same
X
session by pressing the assigned "Prior Loop" button on the
microscope handle.
Refer to the ARveo 8 user manual for a full list of the assignable
X
functions.
18
1
2
GLOW800 / Ref. 10 748 652 / Version 01
7.2.2
Via the touch panel
In addition, Play Loop (1) and Prior Loop (2) functions can also be
activated from the GUI.
Tap the "Data review" icon (3) to list the recordings for viewing
X
and exporting.
The following menu appears:
Tap the "Anonymous" check box (2).
X
If you want to name the current patient, see the respective chapter
in the ARveo 8 user manual.
Tap the "Preview & Export" (3) button.
X
The list of recordings and saved images is displayed:
2 3
1
2
3
Advertisement
Table of Contents
