Table of Contents
Advertisement
Preparation before surgery (ARveo 8)
8.2.6
Configuring the foot switch
You can configure the foot switch similarly to the handles.
Ensure you have loaded the surgeon profile you wish to edit.
X
Open the "Foot Switch" settings page in the "Options" ->
X
"Surgeon Settings" page.
Tap the selection field of the desired key on the foot switch.
X
The following selection menu opens:
1
Select the desired function (1) and apply with Confirm (2).
X
The selected function is displayed in the selection field.
The selections are identical to those for the handles with the
exception of the brakes.
24
Example of foot switch with GLOW800 assignment
8.2.7
The preset can be used to quickly enable the GLOW800
functionality on the microscope. This preset profile can be used and
modified, but any changes to the profile settings will not be stored.
Therefore, with each restart, the default profile settings will be
restored.
Moving the joystick on the left handle to the left activates or
deactivates the GLOW800 mode. This preset can also be used as a
starting point when creating a new surgeon profile
(see chapter 8.2.2 "Copying settings from the GLOW800
"_Vascular" or "_Vascular+IGS" preset or existing surgeon profile",
page 20).
2
While on the "Select Surgeon" menu tap the "Show preset
X
profiles" button (1) to receive a list of preset profiles, dependent
on the installed licenses.
The list of "Preset profiles" is displayed:
GLOW800 / Ref. 10 748 652 / Version 01
Selecting the GLOW800 Preset
Since the modifications to this preset cannot be saved, it is
highly recommended to create a new surgeon profile for a
full workflow.
1
Advertisement
Table of Contents
