Table of Contents
Advertisement
Controls
4.3
Status LEDs
The LEDs located on the C-arm of the stand are in the near sight of
the surgeon and inform about the fluorescence and recording status
of the microscope:
4.3.1
ARveo 8 Status LED
1
2
1 Status LED for fluorescence
2 Status LED for recording
The fluorescence status LED (1) indicates the fluorescence activity
Off:
Blue :
Cyan:
Magenta:
The status LED for recording (2) light up in
Red:
Green:
8
no fluorescence,
white light mode
FL400 is activated
FL560 is activated
GLOW800 is activated
GLOW800 loop recording in progress
GLOW800 playback mode
GLOW800 / Ref. 10 748 652 / Version 01
4.4
GUI Activation
In addition to the handle button, GLOW800 can also be activated
and deactivated from the touch screen panel. Tapping the mode
icon (1) a menu of available fluorescence modes is presented. When
tapped, the selected mode becomes immediately active. Tapping
"White Light" sets the system back to white light mode.
1
Advertisement
Table of Contents
