Table of Contents
Advertisement
With Pseudocolor set to "GREEN" or "BLUE"
You can choose the "Pseudocolor" to be "Green" (1) or "Blue" (2) for the fluorescence signal on the monitor. The color is indicated on the "AR
Settings" page.
When using the test card, the fluorescence pseudocolor results on the monitor image should look as follows:
Leica GLOW800
10 746 513-xx
Disabling the "Pseudocolor" will display on the monitor:
• the monochrome fluorescence image in "Single image" mode or
• the monochrome fluorescence image and the digital white light image in Picture-in-picture or Side-by-side mode depending on the
settings on the "Viewing Configuration" page (see chapter 5.3 "Fluorescence display layout", page 10).
• Pseudocolor: Color display in GLOW mode.
1
"GREEN"
A
A
0
1
2
3
4
5
6
7
8
9
Please read the Leica
GLOW800 user manual!
GLOW800 / Ref. 10 748 652 / Version 01
Modify the GLOW800 settings
2
"BLUE"
Leica GLOW800
10 746 513-xx
A
A
0
1
2
3
4
5
6
7
8
Please read the Leica
GLOW800 user manual!
9
17
Advertisement
Table of Contents
