Displaying The Software Version Installed - CEA MATRIX X220 AC/DC Operator's Manual

Displaying the software version installed

The MATRIX X220 - X300 series comes with a digital control and TFT colour display, fitted with firmware defined in the factory.
This firmware is subject to continuous evolution and improvement.
The firmware is identified by a serial number, version of the control board firmware, and version of the TFT display firmware.
To access this information go to the "CONFIGURATION" menu and select the "INFORMATION" menu.
You can access the "CONFIGURATION" menu by:
• Holding down the SET key
• By selecting the icon from the process setting page.
• Select the "INFORMATION" menu.
CONFIGURATION
GENERAL
WELDING
INFORMATION
ERROR PAGE
PANEL LOCK
MAIN MENU MAIN SUB-MENU
SERIAL NUMBER
FW VERSION
INFORMATION
DIS FW VERSION
In the "INFORMATION" menu you can use a QR code to quickly access the user's manual.
for 5 seconds.
PARAMETERS /
HIGH - LOW LIMIT
00000000 (example)
00.04-BETA11
SW0285 (example)
01.03 220404 TIG
(example)
DEFAULT
NOTE
VALUE
Firmware serial number
Control board firmware version
TFT display firmware version
30