Diagnostics Menu - CEA MATRIX X220 AC/DC Operator's Manual

Diagnostics menu

The diagnostics menu provides the service centre with a range of information, of use for detecting any technical problems on the weld-
ing machine.
To access this information go to the "CONFIGURATION" menu and select the "DIAGNOSTIC" menu.
You can access the "CONFIGURATION" menu by:
• Holding down the SET key
• By selecting the icon from the process setting page.
• Select the "DIAGNOSTIC" menu.
CONFIGURATION
INFORMATION
ERROR PAGE
PANEL LOCK
USB SAVE RESTORE DATA
DIAGNOSTIC
MAIN MENU MAIN SUB-MENU
DIAGNOSTIC
for 5 seconds.
PARAMETERS /
HIGH - LOW LIMIT
DEFAULT
NOTE
VALUE
Range of information for the service centre
48