Ways To Provide Power To Your Phone; Phone Behavior During Times Of Network Congestion; Ul Warning; Class 1 Power - Cisco Webex Room Phone User Manual

Ways to Provide Power to Your Phone

Caution
In European Union countries, use only external speakers, microphones, and headsets that are fully compliant
with the EMC Directive [89/336/EC].
Ways to Provide Power to Your Phone
You can provide power to your phone in one of these ways:
• Use the power adapter that comes with your phone.
• If your network supports Power over Ethernet (PoE), you can plug your phone into the network. Plug
If you are not sure whether your network supports PoE, check with your administrator.

Phone Behavior During Times of Network Congestion

Anything that degrades network performance can affect phone audio and video quality, and in some cases,
can cause a call to drop. Sources of network degradation can include, but are not limited to, the following
activities:
• Administrative tasks, such as an internal port scan or security scan
• Attacks that occur on your network, such as a Denial of Service attack

UL Warning

The LAN/Ethernet cable or other cables attached to the device should not be extended outside of the building.

Class 1 Power

Class 1 products must be connected to a mains power outlet with protective earthing.

Product Label

The product label is located on the bottom of the device.

Compliance Statements

Compliance Statements for the European Union

CE Marking

The following CE mark is affixed to the equipment and packaging.
Cisco Webex Room Phone User Guide
26
an Ethernet cable into the Ethernet phone port and into the network.
Product Safety and Security