Cleaning Sensors - Formax FD 3302 Operator's Manual

4.

Cleaning sensors

Adhesion of dust to a sensor may cause a false detection. Clean the sensors using an air duster.
' • Use a non-flammable air duster. Read the cautions for use well, and be sure to keep the
• descriptions in mind.
• The sensors and metallic section are cooled by gas in the air duster, and may be temporarily
condensed. Wait for about five minutes.
Paper sensor
7
Insert the nozzle of air duster into the
hole shown in the figure to blow air.
Paper exit sensor upper, home sensor of folding plate 1
1
Remove the folding plate 1.
Attach the folding plate 1 holding with
both hands .
2
Open the top cover.
0
,&CAUTION
Open or close the top cover
gently.
Hands or fingers may be caught in the
cover section. Doing so may result in
injury.
Chapter 4 Maintaining the Machine
83