Paper Feed Interval Time; Belt Conveyance Volume - Formax FD 3302 Operator's Manual

Chapter Advanced Operation
3
9-5.

Paper feed interval time

Paper feed interval is a paper feed time lag between one sheet and the next sheet Set the feed interval to
[Slow] if [Feed Err Misfeed] occurs with thick, heavy paper even after air volume, etc. has been adjusted.
Setting the feed interval to [Fast] will raise processing performance, but feed error may be more likely to
occur with large sheets of paper such as B4, A3, etc.
7
I
II Ikey on the [Ready] screen-> Touch the � key-> Touch [Feed
Touch the
Interval].
The [Feed Interval] screen is displayed.
No. Name
l Feed Interval
(1
(*)Set to [slow] when using paper length exceeds 457.2 mm/18.00 inches.
9-6.

Belt conveyance volume

Set the ejection conveyance amount to [Large] if double folded thick paper tends to unfold on ejection, stack
unevenly, or jam at the paper ejecting section.
If paper jams occur in the paper ejecting section when the paper length exceeds 457.2 mm/18.00 inches,
change it to "Continuous''.
I
7
II
I
Touch the key on the [Ready] screen-> Touch the
Convey Vol].
The [Belt Convey Vol] screen is displayed.
No. Name
l Belt Convey Vol
(1
70
1QSlow I @Normal
l;a===============:;=======f
l!I
0
Feed Interval
Sets the paper feed interval.
: :; = =============::::
JI
@ Normal
I
Q
Continuous
l!I
0
Belt Convey Vol
Sets the belt conveyance volume
O j - (1 ]
Fast
JI
ll5I
Function
�
key-> Touch [Belt
Large
-(1]
O
1151
Function
Default
value
Normal(*)
Default
value
Normal