Table of Contents
Advertisement
c:,:>
[Belt Convey Vol] is not reset until the power is turned off. However, it returns to [Normal] under the
following conditions.
- When folding mode is changed from custom folding to standard folding.
- When turning off the machine with [Oper Mode] set to [Normal].
9-7.
Idling
When double-feed or mis-feed occurs, or when stopping paper folding operations by pressing the ¢ key,
you can put the machine in the idling state by just stopping feeding operations. To resume paper feed, just
press the ¢ key.
I
I
7
II
Touch the
key-> Touch [Idling].
The [Idling] screen is displayed.
No.
Name
Idling
(1 l
c:,:>
The machine will resume paper feed when the control panel is not operated more than 30 seconds in
the idling state.
Press the@ key to stop the machine during idling.
key on the [Ready] screen-> Touch the� key-> Touch the
l!I
0
Idling
Sets on/off of idling.
Chapter
l ....
□
_ 1 d _l i _n g ____ ___,J - --[1)
151
Function
Advanced Operation
3
[TI
Default
value
Off
71
Advertisement
Table of Contents
