Table of Contents
Advertisement
VERS.2023.03.15
1 BASIC SAFETY INSTRUCTIONS
The CS 352 B is exclusively designed for the cutting of floors made of asphalt, green and cured
concrete (reinforced or not) as well as of industrial cement.
Uses other than the manufacturer's instructions shall be considered as contravening the
regulations. The manufacturer shall not be held responsible for any resulting damage. Any risk
shall be borne entirely by the user. Observing the operating instructions and compliance with
inspection and servicing requirements shall also be considered as included under use in
accordance with the regulations.
1.1 Symbols
Important warnings and pieces of advice are indicated on the machine using symbols. The
following symbols are used on the machine:
Read operator's instructions
Hand protection must be worn
Cutting depth indicator
6
CS 352 B_MAN_EN
Ear protection must be worn
Eye protection shall be worn
Danger: risk of cut
Advertisement
Table of Contents
