Table of Contents
Advertisement
VERS. 21.01.2019
1
BASIC SAFETY INSTRUCTIONS
The CMV 1000 Verto is exclusively designed for the cutting of construction products mainly on
construction sites.
Uses other than the manufacturer's instructions shall be considered as contravening the regulations.
The manufacturer shall not be held responsible for any resulting damage. Any risk shall be borne
entirely by the user. Observing the operating instructions and compliance with inspection and
servicing requirements shall also be considered as included under use in accordance with the
regulations.
1.1
Symbols
Important warnings and pieces of advice are indicated on the machine using symbols. The following
symbols are used on the machine:
Before using the machine read the operating
instructions
Wear ear protection
Never touch the diamond saw blade
during running!
If, you do not use the machine
lock the feed mechanism in any time
Use only the integrated crane hook if you lift up the
machine with crane equipment!
CMV 1000 Verto_MAN_EN
Wear gloves
Wear safety glasses
Rotating direction of the saw blade
Pay attention to the short manual
before switching ON the machine
For dry cutting (in exceptionally cases)
wear additional dust mask
7
Advertisement
Table of Contents
