Welbilt FQ80 Operation Manual page 78

DISPLAY
IS FILTER PAN CLEAN?
IS FRYPOT AND FILTER PAN DRY?
INSERT FILTER PAN
IS FRYPOT DRY?
RETURNING SAVED OIL?
INSERT FILTER PAN
FILL FRYPOT FROM FILTER PAN?
FILLING
IS FRYPOT FULL OF OIL?
REMOVE FILTER PAN
CLEAN FILTER PAN
32. Ensure the filter pan and components are clean. Press the √
(check - YES) button when complete. Pressing the X (NO)
button if the filter pan is not clean prompts to Clean Filter
Pan. Press once filter pan is clean and continue to next step.
33. Ensure the frypot, filter pan and components are completely
dry. Press the √ (check - YES) button when finished.
Ensure that the frypot and filter pan are completely dry
and free of water before filling with oil. Failure to do so
will cause splattering of hot liquid when the oil is
heated to cooking temperature.
34. Reinstall filter leaf assembly. Insert the filter pan and skip to
step 45.
35. Dry the frypot, ensuring it is completely dry. Press the √
(check - YES) button when finished.
Ensure that the frypot is completely dry and free of
water before filling with oil. Failure to do so will cause
splattering of hot liquid when the oil is heated to
cooking temperature.
36. Press the √ (check - YES) button to continue returning the
saved oil.
37. Insert the filter pan with the saved oil removed in step 20.
38. Press the √ (check - YES) button to fill the frypot.
39. No action is required while the vat is filling.
40. Press the X (NO) button to return to previous step and run
the pump again, if the oil level is below the bottom oil level
line. Press the √ (check - YES) button once the oil level is at
or above the bottom oil level line. If the frypot oil level is not
at or above the bottom oil level line, check the filter pan to
see if most of the oil has returned. The filter pan may have a
small amount of remaining oil.
41. Carefully pull the filter pan from the fryer.
Remove the filter pan slowly to avoid splashing of hot
oil that may cause severe burns, slipping and falling.
42. Remove the filter leaf assembly. Remove the filter envelope.
Clean all the filter components and filter pan. Press the √
(check - YES) button when finished.
2-27
ACTION
DANGER
DANGER
DANGER