Welbilt FQ80 Operation Manual page 77

DISPLAY
INSERT FILTER PAN
CLOSE DISPOSE VALVE
ALERT DRAIN CLOSING REMOVE
TOOLS
SOLUTION ADDED?
CLEANING or BOIL OUT
CLEAN or BOIL OUT DONE
INSERT CLEANING DISPOSAL UNIT
changing to
IS CLEANING DISPOSAL UNIT IN
PLACE?
DRAINING
RINSE COMPLETE?
IS SOLUTION REMOVED?
ALERT DRAIN CLOSING REMOVE
TOOLS
REMOVE THE CLEANING SOLUTION
UNIT
20. Insert the filter pan.
21. Close the dispose valve by pushing the valve handle toward
the rear of the fryer until it stops. Disconnect the dispose
hose from the fryer.
22. Ensure that all tools are removed from the frypot prior to
the drain closing to prevent damage to the drain.
Keep all items out of drains. Closing actuators may
cause damage or injury.
23. Fill the vat to be cleaned with water and cleaning solution
mix. Press the √ (check – YES) button to start the cleaning
procedure.
24. Scrub the vat and then let the solution soak while the cold
clean or boil out timer counts down.
25. Press the √ (check - YES) button to silence the alarm.
26. Insert the cleaning disposal unit or disposal pan large
enough to contain 16 gallons (61 liters) or more under the
drain and press √ (check-YES).
27. No action is required while the vat drains.
28. Rinse excess solution from vat. Press the √ (check - YES)
button when the vat is completely rinsed.
29. Ensure the solution is removed and press the √ (check - YES)
button when the vat is completely rinsed.
30. Ensure that all tools are removed from the frypot prior to
the drain closing to prevent damage to the drain.
Keep all items out of drains. Closing actuators may
cause damage or injury.
31. Remove cleaning solution unit or disposal pan and press the
√ (check - YES) button when finished. If oil was saved, skip to
step 35.
2-26
ACTION
DANGER
DANGER