Welbilt FQ80 Operation Manual page 59

CLEAN FILTER PAN
CONFIRM
TPM - XX
DISCARD SOON
DISCARD NOW?
*NOTE: After a clean and filter it is normal to leave some oil in the pan and the level of oil
may not return to the level prior to starting clean and filter.
22. Clean the filter pan. Reassemble the filter pan in order, using
the diagram as a reference and press √ (check - CONFIRM)
button when complete. Skip to step 27 for units without OQS.
23. If OQS = Text and if TPM reading is below OQS SETUP –
DISCARD NOW and DISCARD SOON limits, the TPM value is
shown in the green TPM box in lower right corner. Proceed to
step 27.
If OQS = Text and if TPM reading is below OQS SETUP –
DISCARD NOW but above DISCARD SOON limits, the TPM
value is shown in the yellow TPM box in lower right corner.
Proceed to DISCARD SOON in step 25.
If OQS = Text and if TPM reading is above OQS SETUP –
DISCARD NOW limits; the TPM value is shown in the red TPM
box in lower right corner. Proceed to DISCARD NOW in step
26.
If OQS = Number proceed to TPM - XX in step 24.
24. Press the √ (check - YES) button to continue. If the TPM
reading is above OQS SETUP – DISCARD limits, proceed to step
26, otherwise proceed to step 27.
25. Press the √ (check -YES) button to continue. Skip to step 27
26. Press the √ (check -YES) button to continue. Proceed to
DISPOSE in section 2.1.5. Press X (NO) to delay the DISPOSE.
27. The controller switches off.
2-8
Pick Up
Tube
Filter Leaf
Magnesol
Screen
Filter Envelope
Filter
Pan